Stone Fabrication Production Software
Give production the job that was actually sold and approved.
StoneCraftOS keeps project scope, measurements, Sketch-BIM data, estimates and approvals connected as the job moves into fabrication.
Your shop should not have to reconstruct the project from emails, PDFs, texts and someone else’s memory.
Less rework. Fewer surprises. More jobs moving through the shop.
Built for stone fabricators · Connected to estimating · One job from approval to installation
5 active · 1 blocked · 2 ready for install
What is stone fabrication production software?
Software that keeps the approved job connected to the work happening on the shop floor.
Stone fabrication production software helps countertop and stone companies organize and manage jobs as they move through fabrication.
StoneCraftOS connects production to the information already created earlier in the workflow — including customer scope, field measurements, Sketch-BIM project data, estimates and approvals.
Production does not start from another version of the job.
What was sold and approved should be what the shop receives.
Where production breaks down
The shop floor should not have to interpret the job.
Sales has one version.
Estimating has another.
The field team has measurements and photos.
Production gets a drawing, a PDF and a handful of notes.
Someone changed the scope yesterday.
Not everyone knows.
- DetailThe wrong detail gets fabricated.
- CutoutA cutout change never reaches the shop.
- MaterialMaterial information is incomplete.
- RevisionProduction works from an old revision.
- InstallInstallation discovers the mistake last.
By the time a production mistake is visible, the expensive part may already be done.
From approval to fabrication
Move the approved job into production without rebuilding it.
- 01 Estimate
- 02 Proposal
- 03 Approval
- 04 Job
- 05 Production
- 06 Quality
- 07 Delivery
- 08 Installation
StoneCraftOS carries the project forward after approval so production can work from the same job record used upstream.
That means less re-entry and fewer chances for commercial and fabrication information to drift apart.
The handoff should move responsibility — not recreate information.
Explore the complete stone fabrication workflow →Production visibility
Know what is waiting, what is active and what needs attention.
A production team needs more than a list of jobs.
It needs to understand where work stands and what should happen next.
- Which jobs are approved?
- Which jobs are ready for production?
- Which jobs are currently being fabricated?
- Which jobs are blocked?
- Which jobs are waiting on information?
- Which jobs are ready for installation?
Less guessing. Better prioritization. Cleaner shop flow.
Priority & flow
Make the next job obvious.
Production loses time when priorities live in someone’s head, on a whiteboard or in a group text.
StoneCraftOS helps organize active work so the team can see what is ready, what is urgent and what is waiting.
The shop should not need a morning meeting just to discover what is next.
Fabrication details
Keep the details that matter attached to the job.
Production depends on details captured throughout the project.
StoneCraftOS keeps those details connected to the production job instead of scattered across separate documents.
- Material
- Slab
- Pieces
- Dimensions
- Thickness
- Edges
- Cutouts
- Backsplash
- Rooms
- Notes
- Revisions
- Installation requirements
Sketch-BIM + Production
Turn project design into usable fabrication information.
Sketch-BIM structures the physical project — pieces, dimensions, materials, edges, cutouts, backsplash and rooms.
StoneCraftOS keeps that information connected as the job moves into production.
The drawing stops being something production has to interpret. It becomes structured job data.
Explore Sketch-BIM →Revision control
The shop should know which version is the latest version.
Changes happen.
- A customer changes material.
- A cutout moves.
- A backsplash is added.
- A measurement is corrected.
The danger is not the change itself.
The danger is fabrication working from the wrong version.
Every revision should belong to the same job history.
Fewer outdated drawings. Fewer conflicting instructions. Less rework.
Reduce rework
Rework is expensive because the job has already consumed time and material.
A mistake caught during estimating may cost minutes.
The same mistake caught after fabrication may cost a slab, labor, schedule disruption and another trip to the customer.
StoneCraftOS helps keep project information connected earlier so fewer issues become shop-floor surprises.
The cheapest production mistake is the one the shop never has to make.
Commercial to operational
Production should know what the customer actually bought.
The approved scope matters after the sale.
Material, edges, cutouts, backsplash, services and other project requirements should remain connected when the job moves into fabrication.
Less scope drift between estimating and production.
Explore Stone Estimating Software →Production to installation
Do not create another disconnected handoff at the end of the job.
Once fabrication is complete, the project still needs to reach delivery and installation.
StoneCraftOS keeps the job connected so the installation team receives the project context, scope and information already developed throughout the workflow.
The job should stay intact all the way to the customer’s home.
Built for stone production
A generic task board knows that a job is “In Progress.” StoneCraftOS understands what is being fabricated.
Generic project management software can track tasks, owners and due dates.
But stone production depends on fabrication-specific information.
Generic system knows
- Task
- Owner
- Due date
- Status
- Comment
StoneCraftOS also understands
- Slab
- Material
- Piece
- Room
- Edge
- Cutout
- Backsplash
- Measurement
- Revision
- Estimate
- Production job
- Installation
Production management is not just status tracking. It is job context.
Built for professional fabricators
For shops where more than one person touches production.
StoneCraftOS is designed for fabrication companies where sales, estimating, field teams, shop personnel and installers all contribute to the same job.
Each team can focus on its responsibility without breaking the continuity of the project.
Different teams. Same job. Same source of truth.
For owners & production managers
See where work is moving — and where it is stuck.
Management should not need to walk the shop floor just to understand the status of every project.
- What is ready to fabricate?
- What is currently in production?
- What is blocked?
- What is waiting on information?
- What is ready for installation?
- Where is work backing up?
Better visibility makes better operational decisions possible.
Real shop. Real production workflow.
What changes when production runs from connected job information.
XclusiveMarmore
XclusiveMarmore
Since moving production onto StoneCraftOS, we get far more done with the same team — no increase in payroll. We finally have full control over production.
- More work through the same team
- Better production visibility
- Greater operational control
We stopped losing quotes and missing costs in our estimates.
Better production starts upstream. When scope and estimate information stay connected, the shop receives a cleaner job.
We’re extremely happy running our operation on StoneCraftOS, and we recommend it to every fabricator we know.
Implementation
We configure production around the way your shop actually works.
Every fabrication shop has its own production flow, responsibilities and internal terminology.
StoneCraftOS implementation starts by understanding how work currently moves through your operation.
Because production software only matters if the shop actually runs on it.
- 01Understand your production workflow
- 02Define job stages and responsibilities
- 03Configure production information
- 04Set up shop users
- 05Train the team
- 06Run the first real production jobs together
FAQ
Stone fabrication production software, explained.
What is stone fabrication production software?
Stone fabrication production software helps countertop and stone companies organize and manage approved jobs as they move through fabrication, quality, delivery and installation.
Who is StoneCraftOS production software built for?
StoneCraftOS is built for professional countertop and stone fabrication companies, especially shops where sales, estimating, field teams, production and installation need to work from the same project information.
Does StoneCraftOS connect estimating to production?
Yes. StoneCraftOS keeps approved scope and project information connected as a job moves from estimating and proposal into production.
Can StoneCraftOS track production status?
StoneCraftOS is designed to help teams organize production work and understand where jobs are in the fabrication workflow.
Does StoneCraftOS support fabrication details such as edges and cutouts?
Yes. StoneCraftOS is built around fabrication-specific information including materials, slabs, pieces, dimensions, edges, cutouts, backsplash and other project details.
Does production connect to Sketch-BIM?
Yes. Sketch-BIM structures project information such as pieces, dimensions, materials, edges and cutouts so that information can continue into estimating and production.
Can StoneCraftOS help reduce rework?
StoneCraftOS helps keep approved scope, project details and revisions connected so production is less likely to work from incomplete or outdated information.
How is StoneCraftOS different from generic project management software?
Generic project management software focuses on tasks, owners and status. StoneCraftOS connects those operational needs to fabrication-specific job data and the full stone workflow.
Does StoneCraftOS continue from production into installation?
Yes. The same job can continue through delivery and installation with project information already connected from earlier stages.
See your production workflow
Bring us one real job from your production queue.
We’ll show you how StoneCraftOS carries it from approval through fabrication and installation without rebuilding the project at every handoff.
No generic production software presentation. We’ll show the workflow using a real stone fabrication job.